Outdoor cleaning just got easier!
Get rid of moss, mold, mildew, and algae with the new Wet & Forget Rapid Application Hose End. The hose end sprayer makes it easy to apply to hard-to-reach areas and oversized areas. Treat your siding, roof, driveway or deck in minutes!
Customer satisfaction is very important to us, and this product was highly requested by many. We designed this unique hose end based upon our customer needs and input over the years. Our goal was to make our own unique sprayer to address several major issues customers face- high elevations, cleaning large surfaces and coverage area per hose end bottle.
We’ve addressed all three with the new Wet & Forget Hose End.
Our proprietary hose end nozzle reaches up to 30′ so you can avoid pulling out the ladder.
There’s nothing worse than starting an outdoor project and soon realizing you don’t have enough product to finish. One bottle of Wet & Forget Rapid Application Hose End will allow you to cover up to 2,000 sq. ft., depending on the type of surface.
Non-porous surfaces like vinyl siding require less product compared to porous surfaces like cement or brick that will soak up more product.
Finally, we addressed product output. It’s hard to treat a large surface area if only a small amount of product is flowing from the bottle. The Wet & Forget Hose End, Fan Tip setting dispurses large amounts of product quickly and thoroughly so spraying larges surfaces like driveaway and tennis courts can be finished within minutes.
Dual Tips- designed for specific applications:
The fan tip is best for covering large, ground level surfaces. Have a large patio, deck or driveway? Attach the fan tip by aligning the notches and snapping it into place.
The fan tip quickly disperses a large amount of product in a wide spray so you can easily cover the entire area in just a few minutes.
The jet-setting is made for distance and height, making it easy to apply to second story siding and roofing. The jet tip can also reach up to 30 feet high. Now you can apply Wet & Forget to your roof with your feet firmly planted on the ground.
Note: Water pressure and high winds can affect the reach of the hose end sprayer.
The dial on the hose end has three settings:
WATER – only water will flow through the hose end
‘ON’ – mixes the product with water from the spigot and dispenses through the hose end. Turn the dial all the way past the other settings, to the point where it can’t turn further to reach this setting.
‘OFF’ – nothing will flow through the hose end
NOTE: The hose end bottle is a NON-REFILLABLE container.
Step 1: Connect hose end to your garden hose.
Step 2: Choose the best tip for your specific application
Step 3: Turn the water spigot on.
Step 4: Before applying, rinse surrounding plants using the ‘WATER’ setting on your hose end dial to protect them from any overspray (cover petal flowers with a plastic tarp).
Step 5: Point your hose end at the surface you are treating and turn the dial to ‘ON’ and begin spraying in a side to side sweeping motion. Also, if you are treating a vertical surface, start at the top and move down the surface.
Step 6: Once you are finished, turn the dial to ‘WATER’ and rinse off any overspray on plants.
Step 7: Turn your water spigot off and let the fresh water run through your hose end to release the pressure.
Step 8: Lastly, remove the hose end from your garden hose.
Tips for Application
Apply Wet & Forget to a dry outdoor surface until thoroughly saturated. Wear protective eyewear during application. Do not apply if rain is expected within 4-5 hours; the product must dry completely before the surface can get wet.
Keep children and pets off treated surfaces during the initial dry time. Once the surface is dry, the product is no longer active. Therefore, Wet & Forget will not reactivate with sequential rainfalls.
If you have high temperatures in your area, we recommend applying in the morning while the surface is cool, or late afternoon if the surface is no longer retaining heat. When applying to warm surfaces, coat the surface a few times with the product to keep the surface wet with product.
Heat can cause the product to evaporate quickly. Wet & Forget needs to sit on the surface and slowly dry to properly clean. Do not apply in windy conditions to avoid overspray on untargeted areas and to reduce product waste.
Have plants around your home? No worries! To protect your plants, it is important to thoroughly rinse them with water both before and after the application to protect them from overspray.
After you apply Wet & Forget, turn the dial on your hose end sprayer to ‘WATER’ and rinse down your plants. Another option to protect your plants is to cover them with a plastic tarp.
You can also use the ‘WATER’ setting to rinse off any residue left on the windows after your application is fully dry.
Where can I use it?
The Wet & Forget no scrub formula is non-acidic and bleach free, so it can be used on virtually ANY outdoor surface.
Exterior Home Surfaces: Decks (All types), Driveways, Eaves, Gutters, Patios (All types), Roofs (All types), Shingles (All types), Siding (All types)
Lawn & Garden: Awnings, Fences (All types), Gazebos, Greenhouses, Pool Surrounds, Storage Units
Camping: Cabins, RVs
Materials: Aluminum, Asphalt, Brick, Cement, Ceramic, Clay, Composite, Concrete, Dryvit/EIFS, Fabric, Fiberglass, Flagstone, Limestone, Marble, Metal, Natural, Painted, & Stained Wood, Painted Surfaces, Plastic, PVC, Rubber, Sandstone, Slate, Steel, Stone, Stucco, Teak, Textured Surfaces, Tiles, Tin, Vinyl
Commercial: Airports, Amusement Parks, Cemeteries, Freeways, Hospitals, Hotels & Motels, Parks, Public Buildings, Schools, Stadiums, Zoos
Other: AstroTurf, Basketball Courts, Log Homes, Monuments, Tennis Courts
…and practically any other surface you can think of!
How It Works
The product coming out of the hose end sprayer is the same active ingredient as the original Wet & Forget Outdoor, and works in the same manner! It gently removes growths and stains from surfaces over time with repeated exposure to the rain and the wind.
However, the Wet & Forget Hose End bottle is non-refillable. The Hose End bottle has a unique dilution ratio that does not work with Wet & Forget Concentrate. If you use the Wet & Forget Concentrate in your empty Wet & Forget Hose End bottle you will not get the desired results.
You’ll need to purchase a new Wet & Forget Hose End bottle if your surface requires additional product.
Depending on the severity of the growth, you may need to complete an additional application after the initial one. Green growths are easier to remove from surfaces than black growths. So you are likely to see quicker results with green algae.
Stubborn black growths, such as mold, may require another application of Wet & Forget, especially if the stains have been sitting on the surface for a long time. The growth didn’t get there overnight, so expect to wait a little longer to see full worthwhile results.
Be patient, good things take time! You will only have to be patient the first time you clean the surface, then you can move to an annual or even semi-annual treatment to maintain a clean surface.
Wet & Forget is a gentle cleaner which removes black and green stains without damaging surfaces. Extend the life of your outdoor surfaces by cleaning without the use of harsh chemicals.
Wet & Forget removes growths to the root, so once the surface is completely cleaned, you won’t have to reapply it more than once a year as maintenance to keep it clean.
Don’t waste any more time scrubbing or power washing! Wet & Forget does the hard work for you, so you can and get back to doing the things you love!
Check out our application video below!